Hospital Gurney Stretcher

Description

Basic Specs.

1. Specifications: Full length 1930mm, full width 770mm, height lift 510-850mm, back lift 0-70°.
2. Safe working load: 220KG
3. Back lifting system: The back lifting is controlled by a silent gas spring.
4. Height adjustment: metal material rocker system, overload protection function, not easy to break.
5. Bedboard: PE resin molding products.
6. Frame: It is made of welded steel products.
7. Guardrail: PE resin molded guardrail panels on both sides, guardrail height ≥340mm, effective protection height ≥340mm, patients are safer, the guardrail is installed on two iron plates welded vertically with the bed through step screws, which has better strength At the same time ensure the fluency of activities.
8. The guardrail adopts a new safety guardrail design. The buckle of the guardrail is fixed by a 9mm thick lock. When the inside of the guardrail cannot be opened, it can be pressed from the outside to the inside to open the guardrail, which effectively prevents the patient from mistakenly inside. The operation, resulting in bed falling accidents, the strength is better and safer;
9. The four-piece guardrail has small holes on the corners of each guardrail that can be used to hang drainage bags.
10. Casters: Double-sided anti-winding casters with a central lock to prevent hair and other sundries from entering the casters and causing implementation failures. The internal steel bracket, double-bearing cylindrical structure, large load capacity, strong anti-collision, and anti-slide force effect, four There are two casters with a diameter of 150mm. The four corners of the cart are equipped with a caster control system. One foot brakes and the four wheels are fixed at the same time.
11. The central control brake linkage rod is formed by an integrated round tube to ensure higher strength.
12. Independent central fifth wheel system: the fifth wheel control pedals are installed on both sides of the cart, and the central fifth wheel can move freely when retracted;
13. Tray: There is a two-stage injection-molded tray under the bed. The tray is divided into two parts with different sizes and depths. It is equipped with 6 leaking holes and is easy to use. The tray can bear 10Kg.
14. Infusion stands storage rack: The lower part of the back panel is equipped with an infusion stand storage rack, which can be fixed and stored when not in use, and there is a plastic sleeve in the infusion stand storage rack to prevent the infusion stand from colliding and shaking.
15. Oxygen bottle rack: An oxygen bottle of up to 7 liters can be placed horizontally under the bed board, and there are two knobs for fixing.
16. Mattress: The surface of the fabric is waterproof and easy to clean. The outer fabric can be washed with water; the thickness of 5 cm allows the patient to lie more comfortably during gastrointestinal endoscopy.
17. Stainless steel hooks: There are four stainless steel metal hooks on the side of the bed, which are fixed with stainless steel rivets, which are stronger and more beautiful.
18. The frame of the bed body is welded vertically by a U-shaped bending square tube of 30*60*1.5mm, with better strength and stable implementation.
19. Infusion stand socket: There are infusion stand sockets around the bed, which can be rotated to place the infusion stand when in use, and can be rotated and stored under the bed when not in use. There is a plastic sleeve in the infusion stand socket to prevent collisions. Beautiful and easy to use.

configuration list:
1. One-bed body;
2. 4 integrated guardrails;
3. 4 double-sided casters;
4. One set of central control locking pedals;
5. One set for the fifth round of the center;
6. 1 set of integral lifting rockers;
7. 1 set of back lifting gas spring;
8. One tray at the bottom;
9. One infusion stand;
10. 4 rotatable infusions stand jacks;
11. One oxygen cylinder hanger;
12. One mattress;