Hospital Gurney Stretcher

Description

1. Specifications: Full length 1930mm, full width 620mm, height lift 510-850mm, back lift 0-70°.
2. Safe working load: 170KG
3. Back lifting system: The back lifting is controlled by a silent gas spring.
4. Height adjustment: metal material rocker system, overload protection function, not easy to break.
5. Bed board: PE resin molding products.
6. Frame: It is made of welded steel products.
7. Double-opening aluminum alloy guardrail: The height of the aluminum alloy guardrail is ≥400mm, and the effective protection height is ≥270mm, making the patient safer. Both ends of the guardrail are equipped with guardrail folding switches to meet the needs of different situations.
8. Casters: Double-sided anti-winding casters with central lock, prevent hair and other sundries from entering the casters and causing implementation failures. The internal steel bracket, double-bearing cylindrical structure, large load capacity, strong anti-collision and anti-side force effect, There are four casters with a diameter of 150mm. The four corners of the cart are equipped with a caster control system. One foot brakes and the four wheels are fixed at the same time.
9. The central control brake linkage rod is formed by an integrated round tube to ensure higher strength.
10. Independent central fifth wheel system: control pedals are installed on both sides of the cart, and the central fifth wheel can move freely when retracted;
11. Pallet: There is a two-stage pallet made by injection molding under the bed. The pallet is divided into two parts of different sizes and depths. There are 6 leaking holes, which are easy to use. The pallet can bear 10Kg.
12. The infusion stand storage rack, the lower part of the back plate is provided with the infusion stand storage rack, which can be fixed and stored when not in use, and there is a plastic sleeve in the infusion stand storage rack to prevent the infusion stand from colliding and shaking.
13. Oxygen cylinder shelf: An oxygen cylinder of up to 7 liters can be placed horizontally on the underside of the bed, and there are two knobs for fixing to prevent the oxygen cylinder from shaking.
14. Transfer mattress: The surface of the fabric is waterproof and easy to clean. The four corners are equipped with zippers, and the outer fabric can be washed with water. The three-stage structure allows parallel docking and transfer of patients with only one operation.
15. There are four stainless steel metal hooks on the side of the bed, which are riveted and fixed with stainless steel rivets, which are stronger and more beautiful.
16. The frame of the bed body is welded vertically by a U-shaped bending square tube of 30*60*1.5mm, which has better strength and stable implementation.
17. Infusion stand socket: There are infusion stand sockets around the bed, which can be rotated to place the infusion stand when in use, and can be rotated and stored under the bed when not in use. There is a plastic sleeve in the infusion stand socket to prevent collisions. Beautiful and easy to use.

configuration list:
1. One-bed body;
2. Two double-opening folding guardrails;
3. 4 double-sided casters;
4. 4 sets of central control locking pedals;
5. One set for the fifth round of the center;
6. 1 set of integral lifting rockers;
7. 1 set of back lifting gas springs;
8. One tray at the bottom;
9. One infusion stand;
10. 4 rotatable infusions stand jacks;
11. One oxygen cylinder hanger;
12. One transfer mattress;